| DESCRIPTION | DWG FORMAT | PDF FORMAT |
| Standard Curb and Gutter | C-1 | C-1 |
| Standard Curb | C-2 | C-2 |
| Rolled Curb and Gutter | C-3 | C-3 |
| Median Curb and Gutter | C-4 | C-4 |
| Sidewalk Joints & Sections | C-5 | C-5 |
| Standard Driveway Approach w/ Park Strip | C-6 | C-6 |
| Standard Driveway Approach w/o Park Strip | C-7 | C-7 |
| Standard Driveway Approach w/o Park Strip | C-8 | C-8 |
| Driveway Approach with Culvert | C-9 | C-9 |
| Depressed Approach | C-10 | C-10 |
| Commercial Approach | C-11 | C-11 |
| Commercial Approach with Grassy Swale | C-12 | C-12 |
| Driveway Approach Locations and Widths | C-13 | C-13 |
| Pedestrian Ramp | C-14 | C-14 |
| Cross Gutter | C-15 | C-15 |
| Inlet Apron | C-17 | C-17 |
| Sidewalk Repair Ramping at Trees | C-18 | C-18 |
| Sidewalk Repair Diversion at Trees | C-19 | C-19 |
| Street Tree Well | C-20 | C-20 |
Engineering Standard Drawings
These documents are technical CAD engineering drawings and may not be fully accessible to all users. If you need this information in an accessible format, please contact the Street and Engineering Department at (208) 769-2235, and we will work with you to provide an accessible alternative.
Concrete
Miscellaneous
Miscellaneous Standard Drawings
| DESCRIPTION | DWG FORMAT | PDF FORMAT |
| Street Name Sign Location | M-1 | M-1 |
| Typical Street Name Sign Details | M-2 | M-2 |
| Tree Planting | M-3 | M-3 |
| Typical Street Sections, Pg 1 | M-4 | M-4 |
| Typical Street Sections, Pg 2 | M-5 | M-5 |
| Chain Link Fence | M-7 | M-7 |
| Signature Block | M-10 | M-10 |
| Trench Cut Pavement Repair | M-11 | M-11 |
| Curb Installation Pavement Repair | M-12 | M-12 |
| Pedestal Mount Light Standard | M-13 | M-13 |
| Street Lighting Notes | M-15 | M-15 |
| Erosion/Sed. Control Notes, Pg 1 | M-16 | M-16 |
| Erosion/Sed. Control Notes, Pg 2 | M-17 | M-17 |
| Stabilized Construction Entrance | M-18 | M-18 |
| Inlet Protection | M-19 | M-19 |
| Silt Fence | M-20 | M-20 |
| Utility Locations | M-21 | M-21 |
| General Plan Notes, Pg 1 | M-22 | M-22 |
| General Plan Notes, Pg 2 | M-23 | M-23 |
| Pavement Notes, Pg 1 | M-24 | M-24 |
| Pavement Notes, Pg 2 | M-25 | M-25 |
| Sewer System Notes, Pg 1 | M-28 | M-28 |
| Sewer System Notes, Pg 2 | M-29 | M-29 |
| Straw Bale Dike | M-30 | M-30 |
| Pavement Design Standards | M-31 | M-31 |
| Pavement Marking Notes | M-32 | M-32 |
| Storm System Notes | M-33 | M-33 |
| Multi-Use Path | M-34 | M-34 |
| Removable Bollard | M-35 | M-35 |
| Crosswalk Striping | M-36 | M-36 |
| Bike Lane Striping | M-37 | M-37 |
| Bike Lane Markings | M-38 | M-38 |
| Pavement Markings | M-39 | M-39 |
| Alley Detail | M-40 | M-40 |
| Parking Stall Requirements | M-41 | M-41 |
| Fire Lane Striping and Signage | M-42 | M-42 |
| Fire Access Requirements | M-43 | M-43 |
Sewer
| DESCRIPTION | DWG FORMAT | PDF FORMAT |
| Standard Sewer Manhole | SS-1 | SS-1 |
| Shallow Manhole Terminus/Laterals | SS-1A | SS-1A |
| Internal Drop Sewer Manhole | SS-2 | SS-2 |
| Doghouse Manhole | SS-3 | SS-3 |
| New Manhole Thickened Collar | SS-4A | SS-4A |
| Existing Manhole Thickened Collar | SS-4B | SS-4B |
| Manhole Frame and Cover | SS-5 | SS-5 |
| Sewer Service Laterals | SS-6 | SS-6 |
| Sewer Service Lateral Markers | SS-7 | SS-7 |
| Sewer Tapping Saddle | SS-8 | SS-8 |
| Sewer Trench and Backfill Detail | SS-9 | SS-9 |
| Force Main Locating Wire Box | SS-10 | SS-10 |
| Temporary Tee Sewer Extension | SS-11 | SS-11 |
| Pressure Sewer Cleanout | SS-12 | SS-12 |
Storm Drainage
Storm Drainage Standard Drawings
| DESCRIPTION | DWG FORMAT | PDF FORMAT |
| Catch Basin, Type 1 | SD-1 | SD-1 |
| Grate Frame, Type 1 | SD-2 | SD-2 |
| Grate Frame, Type 2 | SD-3 | SD-3 |
| Catch Basin Grate - 2 way | SD-4A | SD-4A |
| Catch Basin Grate - 1 way | SD-4B | SD-4B |
| Catch Basin Installation Detail | SD-5 | SD-5 |
| Type A Drywell | SD-6A | SD-6A |
| Type B Drywell | SD-6B | SD-6B |
| Grassy Infiltration Swale | SD-7 | SD-7 |
| Pipe Bedding and Backfill for Storm Drains | SD-8 | SD-8 |
| Curb Inlet Box, Type 1 | SD-9 | SD-9 |
| Curb Inlet Box, Type 2 | SD-10 | SD-10 |
| Swale Drain | SD-11 | SD-11 |
Water
DESCRIPTION | DWG FORMAT | PDF FORMAT |
1" Coppersetter Standard Pit Setting | ||
Water Meter Locations | ||
Typical 6" Fire Hydrant Setting | ||
Fire Hydrant Locations | ||
1"-2" Curb Stop C.I. Box Assembly | ||
Typical Frost Free Blowoff Assembly | ||
1" Air Relief Assembly | ||
Approved A.C. Main Replaced Crossing | ||
Thrust Blocking | ||
Thrust Block Bearing Area | ||
Pipe Bedding and Backfill for Water Mains | ||
Cast Iron Valve Box -Two Piece | ||
Valve Box Adjustments | ||
2" Coppersetter Standard Pit Setting | ||
4" & Larger Domestic Meter Vault Setting | ||
4" & Larger Service Setting, Irrigation Vault | ||
4" & Larger Domestic Service Vault Setting | ||
Pressure Sustaining Valve Assy. | ||
Pressure Reducing Station Assy. | ||
RPBA Premise Isolation, Std. | ||
RPBA Premise Isolation, Alt. | ||
Approved Atmospheric Vacuum Breaker Installation | ||
Approved Pressure Vacuum Breaker Assembly | ||
4" or Larger DC in Vault | ||
Approved 1" & 2" DC for Premise Isolation | ||
Approved DC for Irrigation System | ||
Approved Air Gap | ||
Monitoring Well Modifications | ||
Valve Operating Nut Extension | ||
24" Manhole Cover for Meter Vault | ||
Typical Approved RP for Irrigation System | ||
Approved RP for Building Isolation | ||
1" & 2" Service Reconnect | ||
Water Main Flushing Chart | ||
Approved Pressure Testing Method | ||
Allowable Leak Loss Table | ||
Approved RP for Premise Isolation | ||
Typical Approved DC for Building Isolation | ||
Service Abandoned at Corp Stop - IPS & PJ | ||
Approved RP for Basement Isolation | ||
Approved DC for Basement Isolation | ||
Approved Large RP for Building Isolation | ||
Approved Large RP for Basement Isolation | ||
Approved Large DC for Building Isolation | ||
Approved Large DC for Basement Isolation | ||
PNWS - AWWA RP Discharge Rates | ||
1" Sample Station Assembly | ||
Automatic Flushing Device | ||
Splice Kit Installation | ||
4" and Greater Hot Tap | ||
Bollards |
Contact Us
Hours
Mon — Fri 7am — 3:30pm